Buy Mimaki NC-5 Modeling Plotter from Asokaprinting. The best online electronics store. Contact us : order@asokaprinting.com Phone : +6281262962539 . Get the special price.
Product Description
■Maximum modeling area: 483 x 305mm (19 x 12″)
■Support of HP-GL*1 and G code*2 enables the NC-5 to work with vareious modeling software / CAD software and CNC commands.
■Mechanical Resolution: 0.5μm
■High Horse Power: 1HP(750w)
■Simultaneous 3-axis linear interpolation command for smooth and speedy 3D modeling.
■Models on metals as well as plastics.
■Rigid construction and precisely controlled servo motors for all X, Y and Z axes provide very accurate modeling.
■Coolant can be applied while modeling.
■Collet spindle can use modeling tools (up to 10mm (0.4″) shank diameter)
■T-slot table and Vacuum table options are available.
■Z stroke is 110mm (4.3″)
■Handy operation panel for ease of use.
| NC-5 | |||
|---|---|---|---|
| X-Y Axes |
Working surface | 483mm x 305mm (19″ x 12″) *1 | |
| Maximum Material Size | 520mm x Unlimited (20.5″ x Unlimited) | ||
| Speed | Modeling | 0.5-80mm / sec (0.02″-3.1″ / sec) | |
| Moving | 0.5-80mm / sec (0.02″-3.1″ / sec) | ||
| Acceleration | 0.3G | ||
| Mechanical Resolution | 0.5μm | ||
| Z Axis |
Z stroke | 110mm (4.3″) | |
| Maximum Material Height | 130mm (5.1″) | ||
| Speed | Modeling | 0.5-80mm / sec (0.02″-3.1″ / sec) | |
| Moving | 0.5-80mm / sec (0.02″-3.1″ / sec) | ||
| Mechanical Resolution | 0.5μm | ||
| Command | MGL-IIC3, G *2 | ||
| Spindle | Maximum Rotation | 15000rpm | |
| Adjustable step | Stepless adjustment 2,000-15,000 rpm | ||
| Positioning | JOG Key or JOG Dial | ||
| Maximum Material Weight | 10kg | ||
| Method of setting Endmill | Collet Chuck | ||
| Programmable Steps | 25μm or 10μm (MGL-IIC3), 1μm (G) | ||
| Maximum Shank Diameter of Endmill | 10mm (0.4″) | ||
| Receiver buffer size | 1MB | ||
| Interface | RS-232C | ||
| Table flatness accuracy | 0.2mm | ||
| Distance accuracy | ±0.15mm or ±0.05% of moving distance | ||
| Perpendicularity | ±0.3mm / 300mm | ||
| Repeatability | 0.05mm | ||
| Origin repetition accuracy | ±0.1mm | ||
| Power consumption | 1,400VA or less | ||
| Power requirement | AC 100-120 / 220-240V 50 / 60Hz (Changed by Tap) | ||
| Operation enviorment | 5-40ºC 30-75% (Rh) No Condensation | ||
| Dimensions (W x D x H) | 725mm x 755mm x 660mm (Body) | ||
| 285mm x 505mm x 162mm (Controller) | |||
| Weight | 70kg (Body) | ||
| 25kg (Controller) | |||
Model
| NC-5 | Maximum engraving area: 483mm x 305 mm (19.0 x 12.0″) |
|---|
Overview
- Condition : New
Leave feedback about this